Parkinson Cowan L50GS1WN User Manual download pdf (Page 19)

You can wash the removable parts in very hot soapy water. You may

use mild abrasives. Make sure that the electrode and the hole and slots

in the crown are not blocked with food or cleaning materials.

Clean the burner crowns by soaking them in very hot soapy water. You

can remove any stubborn stains by scouring with a soap filled pad such

as 'Brillo'. If you look after the burner crowns in this way they will stay

reasonably clean. However the surface will dull with time.

Aluminium based saucepans can leave shiny metal marks on the pan

supports. To clean the pan supports regularly remove the marks using a

mild abrasive like 'Cif' with a soft scourer. For more stubborn marks you

can use a soap filled pad such as 'Brillo'.

After cleaning the appliance parts, dry them

thoroughly before you put them back.

When replacing hotplate burner parts

1. Crown to body (Do not try to force the crown on to the body). Make

sure that the hole in the crown is centrally over the electrode.

Check that the two longer location pegs

sit in the slots in the body. When the

crown is in the position let it fall freely on

to the body.

Check that the crown can be moved

slightly from side to side.

2. Cap to crown

Place cap centrally on the top of crown

(enamel side up). Move sideways and

front to back to check the cap is fitted

properly.

3. Check for ignition

If a burner will not light then you need to

check the crown and cap positions.

L Y R I C 5 0 G S 1

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

No comments

Parkinson Cowan L50GS1WN User Manual Page 19